There is no doubt that air impact wrenches are quite a handy and reliable tool. However, the performance of this nifty tool can go south real quick if it does not receive proper maintenance. Therefore, if you want to keep your impact wrench around for longer learn how to oil it properly.
Oiling an impact wrench is a critical part of maintenance. A few drops of oil used the right way can revive the performance of an air impact wrench. However, the condition is to use those few miraculous drops the right way and in the right place; otherwise, you are asking for trouble.
Do not fret, instead of leaving you to fend for yourself and search for oiling procedures, I come bearing great news. I have jotted down the entire process of how you can oil an air impact wrench in layman’s terms in the article below. So, a single read of a few minutes will give you all the information you need to take care of your precious tool.
How To Oil Air Impact Wrench
The steps listed below will teach you how to oil an air impact wrench.
Before we dive into the procedure of oiling an air impact wrench, you need to do a few preliminary steps. Make sure that you have disconnected the air impact wrench from the air compressor, and turned off the pressure of the compressor. Furthermore, remove the air hose from the impact wrench. Make sure to take out the connector along with the air hose.
Process Of Oiling Air Impact Wrench
The procedure of oiling an air impact wrench is quite simple, you are only going to need the lubricant bottle and a screwdriver.
The first step of oiling an impact wrench requires you to have your impact wrench in a well-lit place. Take your impact wrench and remove the hammer head from the body of the tool. You are going to need a screwdriver for this, as the hammer head is attached to the body with a couple of screws. There are present either at the front, above the trigger or at the back of the head. Make sure to take all of the screws out and then place them in a secure place so you do not lose sight of them.
Once all the screws are out of the head, hold your thumb on the anvil to keep it in its place and then lift the head off the tool’s body. Place it on the table and now you need to remove the anvil. The anvil can not be removed by simply lifting, you need to rotate it to remove it from the body of the impact wrench. Once the anvil is also eliminated from the body, it is time to disassemble the remaining part, i.e., the hammers. Take them out of the body, and remove the hammer pins to disassemble the entire design. A critical step here is to place every bit that comes out of the air impact wrench carefully on the table.
Take a small piece of lint-free cloth and wipe down all of the parts that just came out of your impact wrench. Now take the oil bottle, and add a few drops to the hammers. Make sure to only add a maximum of 2 drops to each hammer, and place them back in their frame with the pins. Now take the anvil and add oil to it. Unlike the hammers, you can oil the anvil quite generously, especially the part that goes inside the hammer frame.
Put the anvil back in its place and then take the re-assembled parts and put them back onto the tool. Take the last piece of the air impact wrench i.e., the hammer head and add a few drops to it as well. Place the head back on the anvil and tighten it in its position with the screws. You can wipe the exterior of the air impact wrench with a clean cloth in case there are a few drops of oil on it.
Importance Of Oiling Air Impact Wrench
Oiling an air impact wrench makes sure that the anvil and the hammers present inside the head move smoothly. Therefore, there will be no hindrance during the usage of the tool. Oiling after a couple of uses keeps all the parts well-lubricated, so they do not endure any damage or have their lifespan shortened.
An air impact wrench is a must in the garage of every person who loves working on automobiles or projects around the house. However, to keep the performance of the tool trouble-free, you need to make sure to oil it after a couple of uses. But only the proper way of oiling will revive your tool, so read the article above carefully to find out how you can oil your air impact wrench.